Connect SIDES Pay Terminal in Admin

Connect SIDES Pay Terminal in Admin


Before setting up the terminal:


1. Go to Admin -> Hardware & System -> Payment terminals





2. Add a new terminal with click on "Add terminal".






3. Set up the SIDES Pay payment terminal according to this example.






4. Connect the SIDES Pay Terminal.




Press and hold the ON/OFF button on the right side of the terminal for about 3 seconds.
In the device settings, search for the corresponding WLAN and connect.

The WLAN encryption must be set to WPA2 + WPA3.



The terminal must be in the same network / WLAN as the hardware of the cash register / POS.

Swipe your finger from LEFT to RIGHT to access the settings.





The admin PIN is: 07139




At the second position from the bottom on: Generate pairing code.
-> A new CODE is ALWAYS generated. -> This must be entered at "Registration code" in the Admin (step 3).




5. Done - The terminal is now ready for immediate use.

6. On request, a picture submitted by the customer - JPG, PNG with a size of up to 2 MB or a GIF file with a size of up to 4 MB can be stored on the terminal.

The size must be 720b x 1280h.




One of the following three printing options must be set up:

7. a) If customers want the payment confirmation from the Stripe Terminal to be printed on the invoice receipt:

   1. Set the payment terminal to YES at the bottom of the Print tab in the store.

   2. Check the print template of the invoice for the existing %terminalReceipt% placeholder and insert it if necessary.

   3. In the payment terminal under Hardware in the printer dropdown, switch to "Use invoice printer. . . . ".

      or

7. b) If a single printout is required:

   1. Set the payment terminal to NO in the print tab at the bottom of the store.

   2. Delete any %terminalReceipt% placeholders in the invoice print template.

   3. In the payment terminal under hardware, select the printer from the drop-down menu.

      or

7. c) If the store does not want to print the payment terminal receipts:

   1. Under Hardware create a printer without values ​​(fake printer) with the option to print the payment terminal.

   2. Select "fake printer" in the payment terminal under hardware in the printer dropdown.



    • Related Articles

    • SIDES Pay Setup

      Create SIDES Pay Merchant Account / https://support.simplydelivery.de/portal/en/kb/articles/merchant-accounts-en Connect SIDES Pay Terminal in Admin + Configure SIDES Pay Terminal in Windows / ...
    • Configure SIDES Pay Terminal in Windows

      Before the connection can begin in the Admin, changes must be made in the Windows network settings. 1. Open the "Command Prompt" in Windows. 2. Enter "ipconfig" as search command. 3. As a result you get the "default gateway" - keep the window open in ...
    • SIDES Pay Terminal OnReader Tipping

      Enable tip functionality with SIDES Pay For the SIDES Pay terminal, the functionality will be available when "Allow tips" is activated in "Global store settings". To do this, go to Admin -> under Store -> Global store settings -> Other settings -> ...
    • Create SIDES Pay Merchant Account

      Opening SIDES Pay Account 1. Log in to the Admin. 2. Navigate to Store -> Stores and click on the Merchant Account button.   3. Click on "Add A Merchant Account". 4. Fill in the form: - 1 - any description - 2 - choose payout method - 3 - add ...
    • SIDES Drive (driver app)

      What The driver app enables efficient management of tours and assignment of orders for delivery in order to optimize workflows for drivers. Where Admin: Store > Stores > Edit > Settings > Disposition/tour management. Admin: Store > Stores > Edit > ...